Memorex MP3 Player MMP8500 User Manual

MMP8500  
User’s Guide  
Personal FM  
Stereo MP3/  
WMA Player  
Before operating this product,  
 
please read these instructions completely.  
Dear Customer:  
Selecting fine audio equipment such as the unit you’ve just purchased is only the start  
of your musical enjoyment. Now it’s time to consider how you can maximize the fun  
and excitement your equipment offers. This manufacturer and the Electronic Industries  
Association’s Consumer Electronics Group want you to get the most out of your  
equipment by playing it at a safe level. One that lets the sound come through loud and  
clear without annoying blaring or distortion and, most importantly, without affecting  
your sensitive hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher  
volumes of sound. So what sounds “normal” can actually be loud and harmful to your  
hearing. Guard against this by setting your equipment at a safe level BEFORE your  
hearing adapts.  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly, and without  
distortion.  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future.  
After all, we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.  
Since hearing damage from loud noise is often undetectable until it is too late, this  
manufacturer and the Electronic Industries Association’s Consumer Electronics Group  
recommend you avoid prolonged exposure to excessive noise. This list of sound levels  
is included for your protection.  
 
2
Decibel  
Level  
30  
Example  
Quiet library, soft whispers  
40  
50  
60  
70  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at two feet  
80  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet engine  
100  
120  
140  
180  
Rocket launching pad  
Information courtesy of the Deafness Research Foundation.  
We  
WantYou  
LISTENING  
ForALifetime  
EIA  
EST. 1924  
 
3
LOCATION OF CONTROLS  
1
2
5
6
7
3
4
8
9
10  
1. Headphone Jack  
2. VOLUME +/– Buttons  
3. Display  
4. Battery Compartment and SD/MMC Memory Card Slot (Side of Unit)  
5. PRESET/Power On-Off/Stop Button  
6. Function Switch (Play, Pause, Skip+/–, Tuning +/–)  
7. MODE Button (Main Menu/Setting)  
8. LOCK Switch  
9. EQ/REPEAT Button  
10. USB Jack  
 
4
BATTERY INSTALLATION  
When the bars in the battery indicator (in the display) become low  
(see figure 1), replace the battery as follows.  
1. Open the battery door by sliding it towards the bottom of the  
unit as shown in figure 2.  
Battery  
Low  
Battery  
Full  
Figure 1  
2. Flip the battery plate upward and insert one (1) “AAA” cell  
battery (included) as shown in figure 3. Alkaline batteries are  
recommended for the longest playing time.  
3. Flip the battery plate to its original position as shown in figure 4 and slide  
the battery door back on.  
+
Figure 2  
Figure 3  
Figure 4  
BATTERY PRECAUTIONS  
Follow these precautions when using batteries in this device:  
1. Use only the size and type of batteries specified.  
2. Be sure to follow the correct polarity when installing the battery as indicated. Reversed  
batteries may cause damage to the device.  
3. If the device is not to be used for a long period of time, remove the battery to prevent damage  
or injury from possible battery leakage.  
4. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.  
(Follow battery manufacturer’s directions.)  
 
5
INSTALLATION (CONTINUED)  
ARM STRAP  
1
2
Insert the arm strap into the slot on the Pull the arm strap and insert it into the  
rear of the unit and pull through.  
buckle.  
HEADPHONE JACK:  
3
Turn on the unit and set the volume  
to low. Insert the headphone’s plug  
into the Headphone jack.  
Pull the strap and fold over, then fasten  
the velcro.  
 
6
DOWNLOADING AND TRANSFERRING FILES  
TO INSTALL THE "DIGITAL AUDIO PLAYER" CD SOFTWARE  
For Windows98 or 98SE:  
The USB mass storage function will not be activated without driver installation. To  
activate the USB mass storage function, please use the installation CD-Rom to install  
the driver.  
For Windows ME, Windows2000 or Windows XP:  
Windows will automatically detect the Audio player without installing the CD software  
when the USB cable is connected. But to Format the player, update the driver or to  
uninstall the software, you must install the CD software.  
For Macintosh OSX:  
Macintosh OSX will automatically detect the Audio player without installing the CD  
software . Do not install the software when using a Macintosh.  
If you are connecting your player to your computer for the first time, please follow  
these instructions:  
Procedure to Install Player Driver  
1. Insert the Installation CD-ROM into the CD Drive. Then the Auto-run program will  
start to install the driver automatically.  
NOTE: If the setup does not start, please run the setup.exe in the CD-ROM Drive  
directory. Click setup.exe on the installation CD.  
 
7
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
2. Follow the on screen instructions to install the driver. Please install the Player driver  
in the directory "C:\Program Files\Memorex\Digital Audio Player”".  
WARNING: DO NOT change the installation path for the "Memorex Solid State Digital  
Audio Player". Otherwise, the driver will not run properly.  
3. After successfully installing the  
driver, you must restart windows.  
 
8
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
4
After installation has completed, the "Memorex Solid  
State Digital Audio Player" will be added to the  
Program folder.  
TRANSFERRING FILES  
You can download MP3 files from the internet or use  
encoding software to convert music that you have on an  
audio CD into MP3 formats. Once these files are stored  
on your computer you can easily copy them to your  
MMP8500.  
Connect the computer to your MMP8500 player using  
the supplied USB cable.  
Press the POWER button to turn the unit on; the  
following will be displayed in the LCD screen of your  
MMP8500:  
A "Removable Disk" window will automatically pop up  
on your computer screen. If a SD/MMC memory card  
has been inserted (see page 14), another folder will  
appear on your computer screen to represent the card.  
To add more files and songs to your player simply drag and drop MP3, WMA or WAV  
files from anywhere on your computer into the "Removable Disk" window.  
When you are finished, see the Safely Remove Hardware procedure on page 10  
before disconnecting the MMP8500.  
 
9
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
SAFELY REMOVING YOUR PLAYER FROM THE COMPUTER  
NOTE: To avoid damage to your player or data loss, always follow the procedure listed  
below before disconnecting the USB cable from your computer or disconnecting the  
player from the USB cable.  
Using your mouse, double click the "Safely  
Remove Hardware" icon on the task bar.  
From the "Safely Remove Hardware"  
window, select "USB Mass Storage  
Device" and click the "Stop" button. The "Stop a Hardware Device" window will pop up  
as shown:  
Click "OK" and when a "Safe to Remove  
Hardware" window is displayed and you may  
remove the player from the USB cable or remove  
the USB cable from the computer.  
 
10  
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
FORMATTING THE PLAYER  
NOTE: All files will be deleted when the player is formatted.  
With the player turned off, connect the player and PC using the supplied USB cable.  
Press the POWER button to turn the unit on.  
Click "Start" on the taskbar and select "Programs". From the Program menu, select  
"Memorex Solid State Digital Audio Player", and then click "Format"; a format dialogue  
box will pop up, click "Start" and the application program will format the player.  
16  
Once the format has completed, click "Close" to exit the format program.  
TO SAFELY REMOVE YOUR PLAYER  
Double click the "Safe Removal" icon to display the "Unplug or Eject Hardware"  
window. Select the device you want to remove and click the "Stop" button.  
Click "OK" and when a "Safe to Remove Hardware" window is displayed and you may  
remove the player from the USB cable or remove the USB cable from the computer.  
 
11  
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
UPDATING THE FIRMWARE (You must first connect your unit to your  
computer)  
Occasionally, Memcorp may release new software (firmware) for this unit enhancing it's  
functionality.  
2. Unzip the firmware into the C:\Program Files\Memorex\Digital Audio Player directory (if this  
is the one selected when installing the drivers).  
3. While the unit if off, connect the USB cable as described previously.  
4. Click on START and select PROGRAM. From the PROGRAM folder, select Memorex Solid  
State Digital Audio Player, then click on UPDATE; the Update dialog box will appear with the  
following message: Please place your MP3 device into recovery mode to continue  
5. Press and hold the PRESET/Power On-Off/Stop button. Wait until you see the dialog box  
begin to load, then release the button; in a few seconds you will see the update screen  
appear with the new version.  
6. Click on START and the application will begin to download the firmware to your player. If a  
dialog box appears on the screen, select YES for updating and Formatting the unit (this will  
delete the files in the unit) or select NO for updating the unit without formatting the unit.  
REALONE PLAYER INSTALLATION (PC ONLY):  
1. Insert the Installation CD.  
2. Click on START and select PROGRAM. From the PROGRAM folder, select Windows  
Explorer.  
3. Select the directory of Windows Explorer and click on the folder of RealOne Player; various  
versions in different languages of the application will be displayed.  
4. Double click the version that you want to install; the installation will then begin  
automatically. For the English version, please double click the “RealOnePlayerV2Gold_en”  
file to begin installation.  
5. Follow the RealOne InstallWizard online prompts to complete the installation.  
NOTE: Before saving tracks to your RealOne player, open the RealOne player and click on  
"CD" at the bottom of the screen. Next, click on Preferences; select MP3 audio as the format,  
then click "OK". This will ensure the music is recorded in the correct format for the MMP8500  
to read.  
 
12  
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
INSTRUCTIONS FOR DOWNLOADING SONGS FROM THE COMPUTER  
USING REALONE SOFTWARE  
1
2
Install the Real One Software.  
When the unit is on, connect the USB cable to the MP3 Player and the USB port of the  
computer. Once the USB cable is connected to the player “Mass Storage” will be  
displayed on the LCD display for approximately three seconds.  
3
4
5
To make sure the computer recognizes the MP3 player, double click on MY  
COMPUTER, and check for a drive called Removable disk. Double click on Removable  
Disk, and make sure the Capacity is equal to 122MB, and minimize this window.  
Insert a Music CD into the CD-ROM drive of your computer, and open Real One Media  
Browser. Next, click on the CD icon on the bottom tool bar of the Media Browser. Click  
on preferences, choose MP3 Audio, and 96Kbps Stereo and click OK.  
Click the "Save Tracks" icon on the bottom menu bar to open the "Select Tracks" dialog  
box. Select the desired tracks on the CD and click "OK" to save the tracks into My  
Library; "Pending" will appear at the end of the tracks' name and "Saved" will shown  
after the tracks' name when finished saving. Choose “My library” from the Menu Bar  
and double click on the yellow folder (Show organizer). Double click on the "All Media"  
(view your entire library) to view a list of the saved songs.  
6
Click on the Yellow plus (+) sign on the left bottom tool bar and click on “Add File” to  
add the tracks to the MP3 player. Once you click on Add File, another dialog box will  
appear on your screen, double click on the name of the CD that you want to load into  
your MP3 player and highlight all of the songs. Right click on the songs and select  
“Send To”, then click on the MP3 player. If you do not see your MP3 player, click on  
Copy to copy the songs.  
7
8
Open the Removable disk window, right click to open another dialog box and click on  
paste to load your songs into your MP3 player. Once you paste the songs, you will  
notice that the MP3 display will show files transferred into the box which means your  
files are been loaded into the player.  
Once the files are finished loading into the player, disconnect the USB cable, insert  
headphones and listen to your music.  
 
13  
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
EXTERNAL MEMORY CARD  
TO AVOID DAMAGE, make sure the unit is off before inserting or removing the card.  
1. Open the battery compartment door by sliding it towards the bottom of the unit, as  
shown in figure 1.  
2. Insert a SD/MMC memory card (not included) up to 512MB, facing up as shown in  
figure 2.  
3. Connect the USB cable as described previously.  
4. Drag MP3 and WMA files into the new folder. The memory card indicator will appear  
at the bottom left corner on the display.  
5. To remove the SD/MMC memory card, push the edge of the card as shown in figure  
3, then the card will spring out. Carefully remove the card.  
Front of  
the card  
Figure 1  
Figure 2  
Figure 3  
 
14  
OPERATION  
TURNING THE POWER ON  
LOCK SWITCH  
1
1
Turn the unit on by pressing the Slide the LOCK switch to the Lock (down)  
PRESET/Power button; the Memorex start position; the lock indicator will appear in the  
screen will appear in the display temporarily. display and no buttons will be able to be  
To turn the unit off, press and hold the pressed. This is useful when you do not want  
PRESET/Power button; “Holding to Power Off” the station/track changed by accidentally  
will appear in the display. When the unit turns pressing a button. Slide the LOCK switch to the  
off, release the PRESET/Power button.  
Unlock (up) position to cancel the Lock function.  
EQ  
NOTES:  
1
If you attempt to turn the power  
on while the LOCK switch is in  
the Lock (down) position, the  
unit will show “HOLD” and then  
turn off.  
While playing MP3s, press and hold the  
EQ/REPEAT button until the EQ display text  
becomes highlighted. Then, repeatedly press the  
EQ/REPEAT button to select the desired EQ  
setting: NORM (Normal), ROCK, UBAS (Ultra  
Bass), JAZZ, CLAS (Classical) or POP. Wait two  
seconds and the unit will exit EQ setting mode.  
The EQ feature is only available  
when playing MP3/WMA files.  
 
15  
OPERATION (CONTINUED)  
TO LISTEN TO THE FM RADIO  
1
2
2
3
1
Turn the unit on by pressing the PRESET/Power Press the MODE button ; the Main menu will  
button; the Memorex start screen will appear in  
the display temporarily.  
appear in the display. Within six seconds, push the  
Function switch towards ƒ until FM RADIO  
is selected, then press the Function switch to  
the Play/Pause position to select it.  
3
4
2
1
When a station is broadcasting in stereo, press  
the EQ/REPEAT button until STEREO appears  
in the display to listen in stereo. Press the  
EQ/REPEAT button again until the word  
STEREO disappears to listen in mono. If the  
station is not strong enough, or not broadcasting  
in stereo, the indicator will not appear.  
Push and release the Function switch  
towards  
For rapid search tuning, push and hold the  
Function switch towards or  
or  
ƒ to tune a station.  
ƒ
for one second, then release; the unit will  
automatically search and stop on the next  
strongest station.  
CONTINUED ON THE NEXT PAGE  
 
16  
OPERATION (CONTINUED)  
5
6
1
2
To turn the unit off, press and hold the  
PRESET/Power button until the unit turns off.  
Press the VOLUME + button to increase  
the volume or the VOLUME – button ƒ to  
decrease the volume.  
ANTENNA  
FM – The headphones act as an antenna for FM. Extend the headphone wire  
for best FM reception.  
 
17  
OPERATION (CONTINUED)  
TO MANUALLY SET A STATION INTO MEMORY  
1
2
Make sure the PRESET indicator does not Push the Function switch; “STORE” will  
appear in the display. If it does, press the appear in the display.  
PRESET/Power button and the PRESET  
indicator will disappear. Tune a desired  
station as described in the previous section.  
3
4
2
1
Select a preset number (“C01” to “C10”) by When the desired memory number appears,  
push the Function switch to store the preset;  
“STORE” will disappear from the display  
and the station will be set into memory.  
pushing the Function switch towards  
or ƒ.  
 
18  
OPERATION (CONTINUED)  
TO AUTOMATICALLY SET STATIONS INTO MEMORY  
1
2
Press and hold the Function switch until “AUTO  
SCAN” appears in the display. The unit will  
automatically store the ten next strong stations  
into memory. New FM Stations will overwrite  
previous presets.  
NOTE: If less than ten stations have been  
scanned into the memory, the memory will keep  
at a frequency with 87.5MHz  
Make sure the PRESET indicator does not  
appear in the display. If it does, press the  
PRESET/Power button and the PRESET  
indicator will disappear.  
TO RECEIVE MEMORY PRESETS  
1
1
3
2
Press the Preset/POWER On-OFF/Stop  
button ; “PRESET” will appear in the display.  
Select  
a
preset number by pushing the  
ƒ or .  
Function switch towards  
Press the Preset/POWER On-OFF/Stop  
button to exit the preset mode, ”PRESET”  
indicator will not disappear from the display  
 
19  
OPERATION (CONTINUED)  
TO LISTEN TO MP3s/WMAs  
1
2
1
2
3
2
1
Turn the unit on by pressing the PRESET/Power  
button ; the Memorex start screen will appear in  
the display temporarily. Press the Function switch If the unit is in the Radio or Stop Watch mode,  
to the Play/Pause position to start playing the  
MP3/WMA files. The MP3 information will scroll  
across the display, the Bit Rate and EQ setting will  
alternate at the bottom of the display and the song  
number and timer will appear at the top of the  
display.  
press the MODE button ; the Main menu will  
appear in the display. Within six seconds, push  
the Function switch towards  
cƒ until  
MUSIC PLAYER is selected, then press the  
Function switch to select it.  
3
4
1
2
Press the VOLUME + button to increase  
the volume or the VOLUME – button ƒ to  
decrease the volume.  
While playing MP3s, press and hold the  
EQ/REPEAT button until the EQ display text  
becomes highlighted. Then, repeatedly press the  
EQ/REPEAT button to select the desired EQ  
setting: NORM (Normal), ROCK, UBAS (Ultra  
Bass), JAZZ, CLAS (Classical) or POP. Wait two  
seconds and the unit will exit EQ setting mode.  
CONTINUED ON THE NEXT PAGE  
 
20  
OPERATION (CONTINUED)  
NOTE:  
5
• See pages 7 through 12 for information  
on uploading MP3 and WMA files to this  
unit.  
Press the PRESET/Power button to stop  
MP3/WMA playback.  
TO PAUSE PLAYBACK  
2
1
During playback, if you wish to pause the Push the Function switch again to resume  
file momentarily, push the Function switch; playback; the sound will return and the timer  
playback will pause and the timer will stop will start counting again.  
counting.  
 
21  
OPERATION (CONTINUED)  
FORWARD/REVERSE SKIP  
1
2
During playback, push the Function switch During playback, push the Function switch  
towards  
to advance the player to the towards  
to move the player back to the  
beginning of the currently playing file. Push  
the Function switch towards repeatedly  
beginning of the next file. Push the  
Function switch towards  
repeatedly to  
to move the player back to lower numbered  
files.  
advance the player to higher number files.  
HIGH-SPEED MUSIC SEARCH  
During playback, push and hold the  
1
2
Function switch towards  
or  
ƒ
1
to move the player forward or backward  
within a file to locate a specific musical  
passage. The player will move forward or  
backward at high speed as long as the the  
Function switch is held. When you release  
the Function switch, normal playback will  
resume.  
 
22  
OPERATION (CONTINUED)  
REPEAT PLAYBACK OF A FILE  
2
1
3
2
1
To repeat a single file, press the EQ/REPEAT The specific track you selected will be  
1
repeated continuously. To cancel Repeat  
playback, press the EQ/REPEAT button  
until the Mode indicator disappears.  
button once while playing a file; “ ” will  
appear in the display. Press the Skip/Search  
ƒ or  
button to select the specific  
track that you wish to repeat.  
REPEAT PLAYBACK OF ALL FILES  
2
1
To repeat all files, press the EQ/REPEAT All tracks on the disc will be repeated  
continuously. To cancel Repeat playback,  
A
button twice while playing a file; “ ” will  
press the EQ/REPEAT button until the Mode  
indicator disappears.  
appear in the display.  
 
23  
OPERATION (CONTINUED)  
TO RANDOMLY PLAY ALL THE FILES AND THEN STOP  
2
1
To randomly play all the files and then The unit will play all the tracks in random  
stop, press the EQ/REPEAT button three order. When all the tracks have been played,  
S
the unit will stop. To cancel Random  
playback, press the EQ/REPEAT button until  
the Mode indicator disappears.  
times while playing a file; “ ” will appear  
in the display.  
TO RANDOMLY PLAY ALL THE FILES CONTINUOUSLY  
2
1
1
2
To randomly play all the files continuously, The unit will play all the tracks in random order  
press the EQ/REPEAT button four times until the PRESET/Power button is pressed  
S
while playing a file; “ ” will appear in the  
display.  
(top stop playback). To cancel Random  
playback, press the EQ/REPEAT button ƒ  
until the Mode indicator disappears.  
 
24  
OPERATION (CONTINUED)  
USING THE STOP WATCH  
1
2
2
3
1
Press the MODE button ; the Main menu will  
appear in the display. Within six seconds, push  
Turn the unit on by pressing the  
PRESET/Power button; the Memorex start  
screen will appear in the display  
temporarily.  
the Function switch towards  
ƒ until STOP  
WATCH is selected, then press the Function  
switch to select it.  
3
4
Press the Function switch to start the timer; the  
timer will then start counting up. Press the  
Function switch to stop the timer; the timer will  
then stop counting. Press the Function switch to  
start the timer up again.  
Press the PRESET/Power button to reset  
the timer to “00:00:000”.  
NOTES:  
The MP3/WMA files can still be played back while using the stop watch.When listening to  
MP3/WMAs (see page 20), follow steps 2 through 4 above to operate the stop watch.  
To turn off MP3/WMA playback when in the Stop watch mode, you need to turn off the unit  
or change the unit back to MP3 mode.  
 
25  
OPERATION (CONTINUED)  
TO CHANGE THE SETTINGS  
1
2
2
1
Within six seconds, select one of the settings by pushing  
the Function switch towards or ƒ.  
CONTRAST: Adjust the contrast.  
Press and hold the MODE button until the Setting  
menu appears in the display.  
EQUALIZER: Select the EQ setting.  
PLAY TIMER: Set Elapsed or Remaining Time,  
which will appear when playing a file.  
LIGHT TIMER: Set the time the backlight will  
remain on after activated.  
3
3
1
Push the Function switch to select the  
setting; the respective menu will appear.  
Adjust the setting by pushing the Function  
switch towards  
ƒ or  
. When the  
desired setting is done, push the Function  
switch again to confirm.  
 
26  
TROUBLESHOOTING GUIDE  
If you experience a problem with this unit, check the chart below before calling for service.  
SYMPTOM  
Unit will not  
turn on.  
CAUSE  
Dead battery, or not  
installed properly.  
SOLUTION  
Replace battery and install  
properly.  
LOCK switch is in the Slide switch to the Unlock  
Lock (down) position. (up) position.  
No sound.  
Headphones are not  
inserted.  
Insert headphones.  
Volume is set too  
low.  
Raise the volume using the  
VOLUME + button.  
The MP3 or WMA files Download uncorrupted  
are corrupted.  
Station not tuned.  
files.  
FM distorted.  
Retune station and extend  
headphone wire.  
Download Failure.  
The computer is not  
recognizing the  
MMP8500.  
Damaged USB cable. Replace cable.  
The MMP8500 must be Turn the MMP8500 on.  
turned on.  
The USB cable is  
Make sure USB cable is  
not securely connected. securely connected.  
Driver is not installed  
or computer is not  
compatible.  
Install driver and/or see  
pages 7 through 12 for  
compatibility.  
 
27  
TROUBLESHOOTING GUIDE (CONTINUED)  
There are rare instances when after downloading the firmware the player will  
not turn on; in these cases the unit will need to be reset.To reset the unit,  
perform the following steps:  
1. Click on the START button of your computer.  
2. Select PROGRAM.  
3. Select Memorex Solid State Digital Audio Player.  
4. Click on UPDATE.  
5. The Update screen will appear with the following message: “Please place  
your MP3 device into recovery mode to continue”.  
6. Open the battery compartment on the player and lift the positive  
connector from the positive end of the battery.  
7. Connect the USB cable to your computer and the other end to the  
MMP8500.  
8. Connect the positive connector back on the battery.  
9. Press and hold the POWER button; the dialog box will begin to load.  
10. Release the button and the update screen will appear.  
11. Click on Start to initiate the loading of the firmware. If a dialog box  
appears on the screen, select YES for updating and Formatting the unit  
(this will delete all the files in the unit) or select NO for updating the unit  
without formatting the unit.  
12. When the loading is complete, click on CLOSE, and the unit is now fully  
functional.  
 
28  
SPECIFICATIONS  
AUDIO  
Frequency Range .......................................................................................20Hz-20KHz  
Headphone Output ..........................................................20mW, 16 ohm (max volume)  
S/N Ratio .....................................................................................................85dB (MP3)  
FILE SUPPORT  
File Type...........................................................................MPEG 1/2/2.5 Layer 3, WMA  
Bit Rate..................................................................................................8Kbps-320Kbps  
Tag Info...............................................................................................................ID3 Tag  
FM TUNER  
FM Frequency Range ........................................................................87.5MHz-108MHz  
Antenna ...............................................................................................Headphone Cord  
GENERAL:  
Dimensions...............................................................................0.95 x 2.5 x 2.75 inches  
Weight ............................................................................................35g (without battery)  
Battery ..............................................................................................1 AAA size alkaline  
LCD.....................................................................................Full Graphics with Backlight  
Language ............................................................................................................English  
USB ...................................................................................................................USB 1.1  
External Memory..........................................................................................SD or MMC  
Built-in Memory....................................................................................................128MB  
Maximum Play Time..................................................Approx 10 hours (128Kbps, MP3)  
Supported OS....................................................Win ME, Win 2000, Win XP, Mac OSX  
Firmware Upgrade..............................................................Yes (except Win 98 or Mac)  
Operating Temperature .................................................................................-5° to 40°C  
Specifications are subject to change without notice.  
 
29  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE,  
PLEASE VISIT OUR WEBSITE AT  
WWW.MEMOREXELECTRONICS.COM  
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.  
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90  
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR  
PLACE OF PURCHASE OR TO MEMOREX.  
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL  
AT 1-800-321-6993.  
 
30  
Memcorp, Inc.  
Weston, FL  
Printed in China  
 

Legacy Car Audio Car Amplifier LA1080 User Manual
Lenovo Laptop 2518X01 User Manual
Lenox Thermostat L5711U User Manual
Lexmark Printer 16M1301 User Manual
Makita Grinder 9015AMJ User Manual
Manitowoc Ice Ice Maker K00363 User Manual
Maytag Clothes Dryer MED5870TW1 User Manual
Mazda MP3 Docking Station C236 79 CFZ User Manual
Melissa Fryer 643 047 User Manual
MGE UPS Systems Switch STS 200A User Manual